'W.A.S.P' Warning Alert System for Pedestrians -- $199
We completely redesigned the internals in order to add a real-time, speed-based Pedestrian Warning Sound to any Tesla or other Electric Vehicle. This new system is:
GPS enabled to detect low speeds and automatically sound the Pedestrian Warning Sound of your choice
Remote control enabled -- allows you to use any compatible 433mHz remote control to trigger any sound you want
Bluetooth enabled -- A full featured mobile app is included to control all aspects of the system
Includes a Micro-SD card to allow you to easily install/add any sounds clips you want, playable via remote control or the mobile app. You can load up to 255 directly accessible clips.
Standard 3.5mm Audio out -- Unlimited expandability if you want to install a bigger speaker or other output devices
For Model S and X, powered from the OBDII port -- NO splicing or wiring required. Totally plug-and-play and completely reversible
For Model 3 or Model Y, you will need to locate an unswitched 12v line to tap into
Everything is included for easy 30 minute (or less) installation
Two remotes are included: One 8-channel remote to access 8 sound clips of your choice. One black,round, 'horn' button to access one sound clip for immediate access from the dashboard or console (see images below)
The device is entirely 'plug-and-play' and does not require any splicing, wiring, soldering, or assembly. You simply attach the power connector to the OBDII port in your car, and run the single power cable to your mounting location (detailed instructions are below). Then hook up the power to WASP and the included USB powered speaker, and you're done. We've even included heavy-duty 3M dual-lock pads to attach WASP to your car. Installation in a Tesla Model S or X takes about 15-30 minutes and only requires one plastic pry tool.
The device comes pre-loaded with 20 sounds to choose from (see video below). But you can remove the SD card an install any sounds you want.
Everything is included in the package:
WASP main system module (about the size of a deck of cards)
GPS antenna for remote mounting under the hood
Powered USB speaker and AUX cable (actual USB speaker may vary from photos)
One 2GB Micro-SD card (pre-loaded with all sounds below)
One 12volt-to-5volt power cord, either OBDII plug or hardwired for DIY connections (see below)
One 8 channel RF remote control, with extra battery
One 1 dedicated 'horn' remote button, with battery
3M Dual-lock Mounting pads for mounting the module and speaker
All cables and connectors
The included USB speaker is loud enough for people nearby your car to hear. It is not loud enough to be heard by other drivers when driving. If you want a louder horn, you can easily add a larger amplifier and speaker as WASP has a standard 3.5mm audio-out socket.
Complete kit includes main module, 8 channel remote, 1-channel dash remote, OBDII power adapter, GPS antenna, powered USB speaker and all cables/connections:
The free iOS and Android mobile app allow you to control all aspects of the WASP, including:
Play Tracks
Set Volume
Assign any track to any remote button (Learning function)
Assign any track to trigger when accelerating or decelerating (low speed)
Set 'Low' and 'High' speed limit for sound triggering/cutoffs
View live 'dashboard' for current speed, GPS reception, and telemetry
Change the Bluetooth Device Name
Debug Mode/Factory Reset
Additional features with free app updates
Main App Screen
Set Volume
Play Tracks
Settings
Remote Learning
Dashboard
For ordering, select how you want to power the W.A.S.P.
Option #1: OBDII 12v->5v converter to Micro USB for Model S/X
Option #2: Hardwire 12v-5v cable to Micro USB for Model S/X/3/Y (you connect to any unswitched 12v source)
W.A.S.P. is currently SOLD OUT. Sorry for the inconvenience.
If you are interested in getting on the wait-list for a future production run, please contact me at: [email protected] If you really need a W.A.S.P unit, please email me at the above address to inquire about a custom built unit.
Please order below. Orders are assembled by hand and shipped in the order received.
Fully Assembled, Complete W.A.S.P. System:
Click here for Model S and X Installation InstructionsClick here for Model 3 and Y Installation Tips Here are all the sound clips installed on the W.A.S.P. System by default -- you can add your own!
Jetson's Car
short beep-beep
R2-D2
Bicycle Bell
JAWS Theme
Knight Rider/KITT
Back to the Future #1
Back to the Future #2
Monty Python Gallops
Knights who say 'Ni!'
Just a Flesh wound
Flinstons Car
Ice Cream Truck
Lone Ranger
V8 Engine Sound
Ferris Bueller
Simpons HaHa!
Ping Sound
Windows Startup Sound
Imperial March
Cantina Song
Darth Vader: "The Power"
Darth Vader - "Don't make me destroy you!"
Darth Vader: "I have you now"
Darth Vader: "Give Yourself to me"
Darth Vader: (breathing)
Peter Gunn Theme
"The WASP"
Acceleration Sound
Deceleration Sound